Balancing tires may seem like a hassle, but not balancing your vehicle’s tires can cause you even more problems. So, is there anything that could make your life easier and your tires better?
Yes, ABC’s balancing beads. Our balancing beads not only balance your tires as well as the complete axle end on your vehicle, but they are applied through a special method that takes about 5 mins per tire, and you won’t even have to remove the tire.
Our injection method is quick and easy-to-balance tires and complete wheel assembly in 5 easy steps.
We’ll walk you through the correct procedure for installing ABC balancing beads into the tire.
The Fastest Tire Balancing Method
Step 1
When doing steer tires, place a floor jack underneath the front axle to take the pressure off them. This is an optional step and is not required.
Step 2
Release the air from the tire through the valve stem.
Step 3
Fill the injection pump by simply pouring the beads into the injection pump reservoir.
Step 4
Attach the chuck to the valve stem, ensure the air pressure is off, and attach your airline.
Step 5
While holding the injection tool vertically, open the air valve release from three to six o’clock, slowly turning the injection tool upward and toward you. Allow a steady stream of air to flow and escort the beads into the tire. The injection process is going to take you about 45 seconds.
Step “If”
If the beads stop flowing due to clogging on the valve stem, you’ve gone too fast. Shut off the air pump source valve and remove the air supply from the pump. Then, open the injection tool valve, releasing any clogged beads at the valve stem with the backpressure from the tire.
Reattach your airline and continue. Once the beads are completely installed into the tire, turn the air valve off, remove the air supply, remove the chuck from the valve stem, and install the included cord. Air up to the proper PSI and install the included valve cap.
Benefits
Some benefits of choosing our tire balancing beads include:
- Even tread wear
- Extended tire life
- Cooler running tire temperatures improve fuel economy
- Reduced maintenance costs on vibration-related repairs
We’re Here To Help!
Don’t hesitate to contact us if you have any questions regarding our balancing method’s instructions or our tire balancing beads. We are happy to help.